防水防油整理劑AG-E 7500B

防水防油整理劑AG-E 7500B

AG-E 7500B 由旭硝子株式會社*自開發的含氟防水防油加工劑,賦予各種纖維以優異的防水防油特性。

一、物化性能             

外觀          乳白色乳液

PH            酸性

比重(20℃)      1.0

含固量          22%

離子性          弱陽離子

溶解性          易稀釋分散于水中  

二、使用方法

AG- E7500B通常采用浸軋法加工使用，標準處方的使用濃度根據對象纖維材料/纖維以及使用目的而有所不同.一般情況下使用濃度為：

AG- E7500B    15-40g/L

干燥條件      100-120℃  1-3分鐘

焙烘條件     150-170℃ 1-3分鐘

產品性能

1.賦予各種纖維以優異的防水防油特性；

2.賦予較為柔軟的手感；

3.穩定性佳,受前道工序的殘留物染料及拼用助劑影響??；

產品性能

1.AG-E7500會有對加工布料的各種特性(強度/柔軟性,抗劈裂,帶電性等),色調,堅牢度帶來影響的情況發生.

2.可以拼用抗靜電劑/柔軟劑/滲透劑等其它助劑,請事先充分確認其相容性及對防水防油性的影響.調液時,請先將各種加工助劑至少稀釋2-3倍以上后再混合.

3.稀釋本品時請用40℃以下的水.加工中請將工作液溫度控制在40℃以下.

4.工作液的PH值請調節在7以下弱酸性,在強酸性和堿性的條件下會影響防水防油性能.           

貯    存

1.本產品請在5℃-35℃的范圍內，避免直射陽光，密閉保存。在冷凍和長期高溫下的保存，有可能對品質產生不好的影響。

2.將本產品從容器中取出時，請先攪拌均勻。

3.請閱讀MSDS并正確使用本產品。

HOLPOSON? AG-E 7500B

AG-E 7500B is a fluorinated waterproof and oil-proof agent developed independently by Asahi Nitz Co., Ltd., which endows various kinds of fibers with excellent waterproof and oil-proof properties.

Physical & chemical properties:             

Appearance:            Milky white emulsion

pH:                    Acidic

Specific gravity (20 ℃):   1.0

Solid content:            22%

Ionicity:                Weak cationic

Solubility:               Easily dilutable and dispersable in water

Usage:

AG-E 7500B is usually used with padding method, and the concentration of the standard recipe varies according to the target fiber material/fiber and the purpose. In general, the concentration is:

AG- E7500B: 15-40g/L

Drying condition: 100-120 ℃ for 1-3 minutes

Baking condition: 150-170 ℃ for 1-3 minutes

Characteristics:

1. Endows all kinds of fibers with excellent waterproof and oil resistant properties;

2. Gives textiles soft hand feel;

3. It has good stability and is little affected by the residual dyes and mix-used agents of in the previous process;

Attentions:

1. AG-E7500B will affect the properties (strength/softness, cleavage resistance, electrification, etc.) of processed fabric, color tone and fastness.

2. Other auxiliaries such as antistatic agent/softener/penetrant can be mix-used. Please fully confirm their compatibility and influence on water and oil resistance in advance. When mixing, please dilute various processing auxiliaries at least 2-3 times before mixing.

3. Please use water below 40 ℃ when diluting the product. Please control the working solution temperature below 40 ℃ during processing.

4. Please adjust the pH value of the working solution below 7 in weak acidity. Waterproof and oil-proof performance will be impacted under the condition of strong acidity and alkalinity.

Storage:

1. Please store the product in temperature range of 5 ℃ - 35 ℃, avoid direct sunlight, and keep it sealed. It is possible to have a bad effect on the quality if it is preserved in freezing and high temperature for a long time.

2. When taking the product out of the container, please mix it evenly first.

3. Please read MSDS and use this product correctly.